SUBSTITUTE FOR CHLORINATED SOLVENTS
in their cold applications
washing, diluting, degreasing, cleaning
NO TOXICITY or ENVIRONMENTAL HAZARD SYMBOL
European Regulation CLP 1272/2008
SGH - GHS Regulations
.jpg)
TYPICAL PHYSICAL AND CHEMICAL SPECIFICATIONS
|
PHYSICAL AND CHEMICAL SPECIFICATIONS |
STANDARDS |
VALUES |
UNITS |
|
Appearance |
Visual |
Fluid |
- |
|
Colour |
Visual |
Colourless |
- |
|
Odour |
Olfatory |
Characteristic |
- |
|
Density at 25°C |
NF EN ISO 12185 |
835 |
kg/m3 |
|
Refractive index |
ISO 5661 |
1.4065 |
- |
|
Freezing point |
ISO 3016 |
<-60 |
°C |
|
Boiling point |
|
178 |
|
|
Water solubility |
- |
0 |
% |
|
Kinematic viscosity at 25°C |
NF EN 3104 |
1.2 |
mm²/s |
|
Acid value |
EN 14104 |
0 |
mg(KOH)/g |
|
Iodine value |
NF EN 14111 |
0 |
gI2/100g |
|
Water content |
NF ISO 6296 |
<10 |
ppm |
|
Residue after evaporation |
NF T 30-084 |
0 |
% |
|
Vapour pressure at 20°C |
NF EN 13016-1 |
0.08 |
kPa |
|
PERFORMANCE SPECIFICATIONS |
|||
|
SPECIFICATIONS |
STANDARDS |
VALUES |
UNITS |
|
KB index |
ASTM D 1133 |
>250 |
- |
|
Evaporation rate |
n-butylacetate = 1 DEE = 1 |
5.54 nm 32' |
Index |
|
Surface tension at 20°C |
ISO 6295 |
25.2 |
Dyn/cm |
|
Breakdown voltage |
IEC 156 |
nm |
Volts |
|
Copper blade corrosion 100h at 40°C |
ISO 2160 |
1a |
Rating |
|
FIRE SAFETY SPECIFICATIONS |
|||
|
SPECIFICATIONS |
STANDARDS |
VALUES |
UNITS |
|
Flash point (closed cup) |
ISO 2719 |
63 |
°C |
|
Flash point |
ASTM E 659 |
220 |
°C |
|
Lower explosion limit |
NF EN 1839 |
0.63 |
% (density) |
|
Upper explosion limit |
NF EN 1839 |
23.6 |
% (density) |
|
TOXICOLOGICAL SPECIFICATIONS |
|||
|
SPECIFICATIONS |
STANDARDS |
VALUES |
UNITS |
|
CMR, irritating and corrosive substance content |
CLP Regulation |
0 |
% |
|
ENVIRONMENTAL SPECIFICATIONS |
|||
|
SPECIFICATIONS |
STANDARDS |
VALUES |
UNITS |
|
Biodegradation |
OECD 301 A OECD 301 C (MITI) |
>70 |
% % |
|
Danger to water |
WGK |
1 |
Class |
|
OVC content (Organo-Volatile Compounds) |
- |
100 |
% |
|
Sulphur content |
GC-MS |
0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
% |
|
Total halogen content |
GC-MS |
0 |
% |
|
Chlorinated solvents content |
- |
0 |
|
|
Aromatic solvents content |
- |
0 |
|
|
Hydrocarbon solvent content |
|
0 |
|
|
Content of substances dangerous for the environment |
CLP regulation |
0 |
% |
|
Content of compounds with a GWP (Global Warming Potential) |
- |
0 |
% |
|
Content of compounds with ODP (Ozone Depletion Potential) |
- |
0 |
% |
NEUTRALENE® 630 is a binary azeotrope.
It is easily recoverable, distillable, and reusable without any loss of its physico-chemical characteristics. The distillation temperature is that of its boiling point; this can be lowered by 30% when using a vacuum distiller.
NEUTRALENE ® 630 is also recoverable, not decanting.
DIRECTION FOR USE
NEUTRALENE® 630 is pure and immiscible with water. NEUTRALENE® 630 is available in water-rinsable version under the reference NEUTRALENE® 630 EM. It is recommended for cleaning floors soiled by resins. After dissolving, the product can easily be removed with water.
APPLICATION AREAS
Degreasing of parts after machining
Dissolving or cleaning of polymer and copolymer resins
Cleaning of application materials for polyurethane resins, epoxies, and bis GMA
|
|
|
| Degreasing cloth |
Degreasing with brush
|
 |
|
|
Ultrasound tanks only for NEUTRALENE 630 |
Spray washing machine only for NEUTRALENE 630 |
|
|
 |
|
Solvent fountains |
Rotational or translational basket |
|
|
|
| A3 washing machines |
PRESENTATIONS
|
25 L Keg
|
200 L Drum
|
Looking for another product?
|
Discover our entire range by clicking on the photo |
.jpg)
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 